Prioritizing Security: The Basis of Accountable Gun Possession
Assume Each Firearm is Loaded
At all times deal with each firearm as whether it is loaded, no matter what you imagine to be the case.
Visually and Bodily Confirm Unloaded Standing
Take away the journal. With the muzzle pointed in a protected course, lock the slide to the rear. Visually examine the chamber to substantiate it is empty. Lastly, run your finger contained in the chamber to make sure there are not any rounds. This double-check is paramount.
Protected Dealing with Space
Select a clear, well-lit workspace that’s free from distractions.
Protecting Gear
Sporting eye safety is strongly really helpful.
By no means Level the Firearm at Something You Do Not Want to Destroy
This primary tenet of gun security applies always. Management the course of the muzzle.
Important Instruments for Protected Disassembly
Glock Disassembly Software/Punch
A specialised instrument designed for eradicating the pins in your Glock.
Small Hammer
A small hammer will be useful for gently tapping out pins, however use it with excessive care and precision.
Eye Safety
Security glasses are essential.
Clear Floor/Work Space
A clear and clear work space is essential.
Optionally available: Vise
A vise will be helpful to stabilize the body whereas eradicating pins, but it surely’s not completely needed.
Taking Aside the Glock 17: A Systematic Method
Separating the Slide
Depress the journal launch button situated on the left facet of the body. Make sure the journal is totally ejected.
With the muzzle pointed in a protected course, pull the slide all the best way again. The slide ought to lock open on the slide cease. Visually examine the chamber and confirm it’s empty. Once more, bodily examine the chamber together with your finger for added safety.
Rotate the takedown lever which is situated on the left facet of the body simply above the set off guard.
Pull the slide barely again, then press the slide catch lever down. The slide will now slide ahead and off the body.
Disassembly of the Slide Elements
This part delves into the parts housed inside the slide.
Recoil Spring Meeting Removing
Fastidiously take away the recoil spring meeting by pulling it straight up and out of the slide.
Taking Out the Barrel
The barrel can now be faraway from the slide. Merely elevate it upward and out of the slide.
Body Part Breakdown
Right here, we are going to look at the method of taking aside the body of your Glock 17.
The Slide Lock/Slide Catch Lever
This piece is a small lever and is situated on the left facet of the body.
Eradicating the Set off Mechanism Housing
Gently slide this plate down and out of the body.
Releasing the Set off Mechanism
The set off mechanism is now seen. It may be simply faraway from the body.
Eradicating the Set off Pin
Use your Glock disassembly instrument or punch to rigorously push this pin out of the body. A mild faucet with a small hammer is perhaps needed.
Releasing the Set off and Set off Bar
With the pin eliminated, the set off and set off bar can now be faraway from the body.
Placing it Again Collectively: Reassembly of the Glock 17
Reinstalling Elements
Start by rigorously reinserting the set off and set off bar into the body.
Re-insert the set off pin
Fastidiously align the holes within the body and set off mechanism, and reinsert the set off pin. Make certain the set off strikes freely after this step.
Set off Mechanism Housing Substitute
Safe the set off mechanism housing (the again plate) again into the body by sliding it up and again into the slide.
Barrel Substitute
Slide the barrel again into the slide.
Recoil Spring Meeting Insertion
Place the recoil spring meeting again into its location beneath the barrel.
Reintegrating the Slide
Place the slide again onto the body by aligning the rails. Pull the slide again. The slide ought to now simply slide back and forth.
Testing and Verification
After the reassembly is accomplished, it’s time to affirm the proper perform of the firearm.
Sustaining Your Glock 17: Cleansing and Lubrication
Important Cleansing Provides
Gun Cleansing Solvent
Select a high-quality gun cleansing solvent to take away carbon buildup and different fouling.
Cleansing Brushes
Quite a lot of brushes, together with a bore brush, a nylon brush, and a small element brush, shall be helpful.
Lubricant
Choose a gun-specific lubricant to maintain the shifting elements functioning easily.
Part-by-Part Cleansing
The Barrel
Use a bore brush saturated with solvent to scrub the barrel.
The Slide
Clear the within of the slide, taking note of the rails. Wipe down the slide with solvent.
The Body
Clear the body, significantly the areas the place the slide and different parts work together.
Small Components
Clear any small parts that had been eliminated throughout disassembly.
Lubrication is Key
Lubrication Factors
Evenly lubricate the slide rails, the barrel hood, the set off mechanism, and every other shifting elements.
Extra Lubrication
Watch out to not over-lubricate.
Troubleshooting Widespread Points
Disassembly Issues
If a pin is caught or a element is tough to take away, resist the urge to drive something.
Set off Points
If the set off would not reset correctly after reassembly, double-check the alignment of the set off bar.
A Few Last Ideas
Disassembling your Glock 17 is an easy course of that, when accomplished accurately, enhances your understanding of the firearm.
Bear in mind to at all times prioritize security, work slowly, and seek the advice of with a certified gunsmith in case you encounter any points you aren’t snug addressing.
The extra you are taking aside and reassemble your Glock 17, the extra snug and assured you’ll turn into. At all times abide by security guidelines.
